Wednesday, October 5, 2016

How-to Pop-up Box Card

You will need card stock measuring at 8 1/4 x 9 inches.


Along the 9 inch side score at 2 1/8, 4 1/4, 6 3/8, 8 1/2.
Turn to the right one side at score at 2 3/4 inches.


Trim the side away from the 2 3/4 score you just made down to 6 inches.  Keep this strip.  Trim it down in half the long way and then cut down to 3 1/8 length.



Cut the short shorelines up to the middle.  Cut off the small edge tab (seen at the right side).


Fold the box up with the remaining tab attached on the inside of the box. I like to place a piece of card stock up the back of the box on one panel to held hold it stiff before I fold down the other three box flaps. (5 7/8x2)


Now take the two saved strips from earlier and fold into Z's.  


Attached to the inside of the box.  One with the Z against the back and one with the Z against the front.  Make sure that the box will flatten out with them in place. (Also helps to get the pieces in right place.)


Now you can add any additional embellishments you wish to the inside and flaps.  Just be sure they will stay within the edge of the card.  When it is flat it ought to measure 5 1/2 x 4 1/4.  If pieces do over hang be sure they fit your envelope at least. You may want to add a stiff piece of card stock or card board so they are not damaged. 


Above: closed (for mailing).
Below: opened (for viewing).


I like to add a large embellishment for signing and words stamps.
I will be adding a short video later as well as an example of a finished card.

Check out my Pinterest page for some more great cards too.


Thursday, September 15, 2016

Wedding Dress and Suit

I made this card a while back but I still love it. The card base is white.  I hand drew the dress line and cut it out and laid it on the black.  I embossed the white dress and gave it some pearls.  I played around with the handkerchief until I got it the way I wanted.  Two small pieces glued down.  I used a pencil to highlight the pocket and collar of the suit.


Of course you can always add your embellishments but this is a great basic idea.

Thursday, September 1, 2016

How to Make a Waterfall Panel

You will need: 4, 1 3/4 inch squares of a white or light card stock to stamp on
                        4, 2 inch squares of card stock your choice of color
                        1, 2x9 strip of card stock to be the "waterfall" your choice of color
                        1, 1x 4 1/4 strip of card stock to anchor the waterfall to the card, your choice of color

First you will need to score the "waterfall" piece (2x9) at 2, 2 3/4, 3 1/2, 4 1/4 inches.


Attach the tops of the 2x2 squares along each score mark, over lapping each.

Attach the anchor piece to the back of the last scored section.


With the "waterfall" laying down in half like this attach the two ends of the anchor piece to your card.   It will fit a card that measures 5 x 4 1/4 inches. 
Brads and eyelets are the best but any strong adhesive will do.

The "waterfall" works when the back half of the waterfall piece is pulled. The scored lines and panels should flip over each other like a waterfall.


A fun optional but good idea is to add a tab so the recipient knows where to pull.  Here I've added a 1/2 inch punched circle to the end of the "waterfall" and some thread. 

Now you can stamp the images you wish on the 1 3/4 inch squares and attach them in any order to the waterfall panels.  I like to add a bit of a larger piece at the end with some fun words. 
The waterfall is heavy but it does stand like most other cards do when on display. 

A quick demonstration of how it works. 

Sunday, August 28, 2016

Simply Sweet Sympathy

I received these lovely flowers in a swap. I used my Stampin'Up subtle markers to color them and attached them to a matching card stock color.  It needed a bit more so I added gold cracked washi tape. Love it.




Friday, August 12, 2016

Fun Film Thank You Card

This is a fun card that I made with a film strip die cut I received in a swap.  The 3 is a die I have as is that thank you stamp. I looked up up the circles to make sure I made them right.  I had to free hand them since I didn't have anything that I could trace that was the right size.
Love it!




Wednesday, August 3, 2016

For Your Country on Night of Navy

This card is 5 12 x 4 1/4 stamped in Stampin'Up! Night of Navy on Whisper White card stock.  Stamps used are World Map and For Your Country with a Night of Navy card stock strip to accent.




I made this for a friend when her son finished Marine Corps boot camp. 

Monday, August 1, 2016

How To Make a Panel Pop Up Card

You will need two pieces of card stock measured 11x 8 1/2.
The first piece cut down to 11 x 4 1/4.  Fold one half in half for the cover.  The other half cut it to 
11 x 2 3/4 then score at 2 3/4, 5 1/2, 8 1/4 and fold into mountains.  Set them a side.


One the second piece of card stock make to 11 inch side and mark at 4 1/4, 5 1/2, 6 3/4 and draw lines across the page.


Turn over to the 8 1/2 inch side and mark at 2 1/8, 4 1/4, 6 3/8 and draw lines across the page.


This is what your lines should look like.  (It will be the inside of the card.) If you want it to be slightly smaller than the cover make to the inside of your drawn lines another 1/8 inch including the edges. Cut off the corners following the set of lines you plan to use.  If you don't make it a bit smaller this piece will fit exactly to the cover.

Fold down the center lines up and down and across.


This is the tricky part.  You will have to fold the center line of the right edge down to the center line of the bottom area.  Unfold it and repeat with the left side.


You should end up with an X like this with the centers of all your folds meeting in the middle. It will also look like two arrows pointing at each other. 
You will now fold the center line of the "arms" into mountains (up) but the point lines will be down (valleys).


This is what it will look like.  Lay it flat while folded to crease all the folds.


Take the "M" folded piece from earlier and turn it to the right.  The M should be facing your right.


Center the M and attach the right arm to the M.  Pull the left arm out and attach it to the front of the M.


Take this finished piece and line it up to the crease of the cover and center on one half and attach.  


Attach the other half and fold it down flat.


Finished!


A quick video to show how the card ought to open.